Knit a Coco raglan sweater for children
The raglan sweater for children is knitted in rounds from the bottom up and is available in many sizes. The pattern is created using a color yarn.
The shoulders of the raglan construction run from the armpit to the neckline, ensuring a particularly good fit.
A tutorial from Lang Yarns.
- Langyarns Merino120 Color (240m/100g)
-
-
purple-yellow-brown-aqua 001
- blue-wine red-brown-salmon 002
-
green-rose-blue-grey 003
- yellow-petrol-orange-lilac 004
-
- 1 addi circular needle in sizes US 4 (3.5 mm) and 6 (4 mm)
- 1 short circular needle in sizes US 4 (3.5 mm) and 6 (4 mm)
- set of double-pointed needles or addiCraSyTrio in sizes US 4 (3.5 mm) and 6 (4 mm)
- Stitch markers
- 74 – 80 = 9 – 12 month
- 86 – 92 = 18 month – 2 years
- 98 – 104 = 3 – 4 years
- 110 – 116 = 5 – 6 years
- 122 – 128 = 7 – 8 years
Yarn consumption:
- 200/200/250/300/350 g = 4/4/5/6/7 balls
-
Chest: 23½“/25¼“/26¾“/28¼“/30“ (60/64/68/72/76 cm)Length: 12¼“/13½“/15“/16½“/18“ (31/34/38/42/46 cm)
Gauge:
- 21 sts x 28 r = 10 x 10 cm / 4"x4"
- Stockinette st in the round = knit all sts. In rows = knit on RS, purl on WS.
- K1:P1 rib, * k1, p1, rep from * around.
Knit a raglan sweater: Back and Front
- Cast on 134/146/154/166/174 sts with US 4 (3.5 mm) circular needles
- Close to work in the round, work 1 rnd in knit, place a marker for beginning of rnd and another after 67/73/77/83/87 sts
- Now knit in pattern I
Continue working the sts as they face you until your work measures 1½” (4 cm), then change to US 6 (4 mm) needles and arrange pattern as follows:
- * k1, p2, k1, p1, 57/63/67/73/77 sts stockinette,
- decreasing 8/10/10/12/12 sts evenly over these sts,
- p1, k1, p2, k1, rep from * once more = 118/126/134/142/150 sts
- When your work measures 2¾“/3¼“/3¼“/4“/4“ (7/8/8/10/10 cm) from the cast-on, inc as follows for the side shaping:
- Cast on 1 st for 4 times (see tip 2).
- Work the next rnd as follows: bind off 3 sts, k 57/61/65/69/73, bind off 6 sts, k 57/61/65/69/73, bind off 3 sts. Leave the sts on a holder.
Tip 2: Accented stitches (sideways slant): After the stitch marker = K1, P2, K1, P1, K1, K1 cast on st twisted. Before the stitch marker = cast on 1 st twisted, K1, P1, K1, P2, K1.
Knit a raglan sweater: Back and Front
- Cast on 134/146/154/166/174 sts with US 4 (3.5 mm) circular needles
- Close to work in the round, work 1 rnd in knit, place a marker for beginning of rnd and another after 67/73/77/83/87 sts
- Now knit in pattern I
Continue working the sts as they face you until your work measures 1½” (4 cm), then change to US 6 (4 mm) needles and arrange pattern as follows:
- * k1, p2, k1, p1, 57/63/67/73/77 sts stockinette,
- decreasing 8/10/10/12/12 sts evenly over these sts,
- p1, k1, p2, k1, rep from * once more = 118/126/134/142/150 sts
- When your work measures 2¾“/3¼“/3¼“/4“/4“ (7/8/8/10/10 cm) from the cast-on, inc as follows for the side shaping:
- Cast on 1 st for 4 times (see tip 2).
- Work the next rnd as follows: bind off 3 sts, k 57/61/65/69/73, bind off 6 sts, k 57/61/65/69/73, bind off 3 sts. Leave the sts on a holder.
Tip 2: Accented stitches (sideways slant): After the stitch marker = K1, P2, K1, P1, K1, K1 cast on st twisted. Before the stitch marker = cast on 1 st twisted, K1, P1, K1, P2, K1.
Work the sleeves
- Cast on 42/44/50/52/52 sts with US 4 (3.5 mm) double-pointed needles.
- Knit in the round in pattern III. At 4 cm from the cast-on, continue in the round in pattern II with needle size 4
- Close to work in the round and place a marker for beginning of rnd. - Work K1:P1 rib in the round: * k1, p1, rep from * around.
- Repeat these incs every 4th rnd / every 4th rnd / every 6th rnd / every 8th rnd / every 6th rnd another 9x/9x/9x/9x/12x = 50/52/58/60/66 st. At 22/25/28/33/36 cm from the cast-on, work 1 rnd as follows
- knit: from the beginning of the rnd, bind off 3 st, k44/46/52/54/60, bind off 3 st. Leave the st on hold. Knit the 2nd sleeve in the same way.
- Tip 3: Emphasised incs (sleeve shaping): After the marked st = k1, inc 1 knitwise through the back loop. Before the marked st = inc 1 knitwise through the back loop, k1.
Work the sleeves
- Cast on 42/44/50/52/52 sts with US 4 (3.5 mm) double-pointed needles.
- Knit in the round in pattern III. At 4 cm from the cast-on, continue in the round in pattern II with needle size 4
- Close to work in the round and place a marker for beginning of rnd. - Work K1:P1 rib in the round: * k1, p1, rep from * around.
- Repeat these incs every 4th rnd / every 4th rnd / every 6th rnd / every 8th rnd / every 6th rnd another 9x/9x/9x/9x/12x = 50/52/58/60/66 st. At 22/25/28/33/36 cm from the cast-on, work 1 rnd as follows
- knit: from the beginning of the rnd, bind off 3 st, k44/46/52/54/60, bind off 3 st. Leave the st on hold. Knit the 2nd sleeve in the same way.
- Tip 3: Emphasised incs (sleeve shaping): After the marked st = k1, inc 1 knitwise through the back loop. Before the marked st = inc 1 knitwise through the back loop, k1.
Yoke
- Place the 57/61/65/69/73 st of the front left on hold onto a long 4 mm circular knitting needle.
- Then place the 44/46/52/54/60 st of the 1st sleeve, 57/61/65/69/73 st of the back and 44/46/52/54/60 st of the 2nd sleeve onto the circular knitting needle in the same way = 202/214/234/246/266 st.
- Now continue knitting for the raglan decreases in the following pattern layout, marking the beginning of the round and the centre stitch of the front:
- k1, p1, 1 skp dec (sl 1, k1 and pass the slipped st over the knitted st), k49/53/57/61/65, k2tog, p1, k1, p1, k1, p1, 1 skp dec, k34/36/42/44/50, k2tog, p1, k1, p1, k1, p1, 1 skp dec, k49/53/57/61/65, k2tog, p1, k1, p1, k1, p1, 1 skp dec, k34/36/42/44/50, k2tog, p1, k1, p1 = 194/206/226/238/258 st.
- Repeat these raglan decreases another 13x/14x/15x/15x/17x every 2nd rnd/row and 4x/4x/5x/6x/6x every row.
- Shape V-neck: at the same time when you make the 2nd rnd of raglan decreases divide for V-neck, bind off the center front st and work to end of rnd.
- Now continue working in rows, whilst also proceeding with the raglan decreases.
- Work fully fashioned dec at the neck edge as follows: Dec Row (RS): k1 (edge st), sl1, k1, psso, work to the last 3 sts, k2tog, k1 (edge st) – 2 sts decreased. - Rep dec every 2nd row twice and every 4th row 4 times / every 2nd row 4 times and every 4th row 3 times / every 2nd row 5 times and every 4th row 3 times / every 2nd row 5 times and every 4th row 4 times / every 2nd row 6 times and every 4th row 4 times. When all decreases have been completed you will have 45/47/49/51/53 sts. Leave the sts on a holder.
- Tip 4: Raglan dec (in rnds): Always work 1 skp dec (sl 1, k1 and pass the slipped st over the knitted st) after the 5 st of pattern III and k2tog before the 5 st of pattern III. In rows = on RS rows, always work 1 skp dec after the 5 st of pattern III and k2tog before the 5 st of pattern III. WS rows = p2tog tbl before the 5 st of pattern III and p2tog after the 5 st of pattern III.
- Tip 5: Accentuated decrease (V-neck): Right edge = 1 edge stitch, 1 psso decrease. Left edge = knit 2 stitches together, 1 edge stitch.
Finsihing
- V-neck border: with US 4 (3.5 mm) circular needle, pick up the 45/47/49/51/53 sts from the holder (see tip 6)
- then pick up 26/28/29/31/33 sts either side of the V-neck + 1 center front st. Work K1:P1 rib in the round, arranging the sts with k1 at center front
- Now dec every rnd (including the bind off rnd) over 3 sts at center front as follows: sl2tog knitwise, k1, psso When the border measures about 1¼“ (3 cm), bind off all sts loosely in pattern. Weave in ends. Block as desired
- Tip 6: take care with the sts from all pieces, that they can continue to be knitted in K1:P1 rib, dec if necessary
Finsihing
- V-neck border: with US 4 (3.5 mm) circular needle, pick up the 45/47/49/51/53 sts from the holder (see tip 6)
- then pick up 26/28/29/31/33 sts either side of the V-neck + 1 center front st. Work K1:P1 rib in the round, arranging the sts with k1 at center front
- Now dec every rnd (including the bind off rnd) over 3 sts at center front as follows: sl2tog knitwise, k1, psso When the border measures about 1¼“ (3 cm), bind off all sts loosely in pattern. Weave in ends. Block as desired
- Tip 6: take care with the sts from all pieces, that they can continue to be knitted in K1:P1 rib, dec if necessary
Tutorial also available for download and in the addi2go app
You can find the written instructions to print out in GER, FR, NL, ENG and DK from our partner LANG YARNS.
You can also find the instructions digitally in our addi2go app. There you can save the instructions in a project with row counters and notes.